disk at once

顯示結果從第 1 筆 到 8 筆,共計 8 筆

主題: disk at once

  1. #1
    會員
    註冊日期
    2001-04-02
    討論區文章
    95

    disk at once

    我用5582,disk at once我懂,但是還有一個是disk at once/96這是什麼呀?



  2. #2
    會員
    註冊日期
    2002-02-20
    討論區文章
    72

    Re: disk at once

    最初由 mulicia 發表
    我用5582,disk at once我懂,但是還有一個是disk at once/96這是什麼呀?
    看看 cloneCD 的解釋吧!


    "
    RAW-DAO 96 = 2352 bytes RAW Data + 96 Bytes P-W Subchannel Data. This is the best mode for CloneCD. It allows writing of all subchannel information, including Digital Signatures, CD-Text, ISRC, Catalog Numbers, CD+G, CD+Midi, Gaps, Indices and Crazy TOCs.
    RAW-DAO 94 = 2352 bytes RAW Data + 94 Bytes P-W Subchannel Data. Same as RAW-DAO 96, but 2-Bytes CRC of the Q Subchannel are generated by the writer.
    RAW-DAO 16 = 2352 bytes RAW Data + 16 Bytes P-Q Subchannel Data. This is the second best mode for CloneCD. It allows writing of most subchannel information, including most Digital Signatures, ISRC, Catalog Numbers, Gaps, Indices and Crazy TOCs. 2-Bytes CRC of the Q Subchannel are generated by the writer.
    RAW-SAO = 2352 bytes RAW Data. This is the third best mode for CloneCD. Feature support is drive dependend. ISRC, Catalog Numbers and Indices can be written. Usually CD-Text, CD+G and CD+MIDI can be written as well. Crazy TOCs and Digital Signatures can't be written in this mode.
    SAO = 2352 bytes error corrected Data. This is the worst mode for CloneCD. Writing of ISRC, Catalog Numbers, Indices and usually CD-Text is supported.
    "

  3. #3
    會員
    註冊日期
    2001-04-02
    討論區文章
    95
    我........英文不好,對不起

  4. #4
    會員
    註冊日期
    2002-02-20
    討論區文章
    72
    最初由 mulicia 發表
    我........英文不好,對不起
    "RAW-DAO 96 = 2352 bytes RAW Data + 96 Bytes P-W Subchannel Data. "
    大意是說 RAW DAO(disk at once) 一般磁區主要通道有 2352 byte 另外加上次通道的96 byte 是clone CD 最好的寫入模式.
    另外建議看看 jess 版主的大作 "光磁容量計算淺談"

    http://www.pczone.com.tw/showthread.php?t=59887

  5. #5
    會員
    註冊日期
    2001-04-02
    討論區文章
    95
    我的疑問是;加了那96有差嗎?會比較穩嗎?



  6. #6
    會員
    註冊日期
    2002-02-20
    討論區文章
    72
    最初由 mulicia 發表
    我的疑問是;加了那96有差嗎?會比較穩嗎?
    我不知道您所謂的"穩"的意思,不過考慮次通道的空間如果放了一些除錯碼或檢核碼或其他的東東...,您在備份光碟時,可能就會因為少了這些東東而不能執行,尤其是Game方面的光碟啦.因此jess 板大的大作中提到”光碟片容納資料的最小單位稱為sector(磁區),磁區分主通道和次通道兩部份。主通道是正常資料(檔案、音軌..)儲存所在,大小是2352 bytes,計算光碟容量時,僅僅計算此部份;次通道次通道有P~W等八個,總計98位元組,則原本是擺放像音樂光碟的歌手、曲名、公司等及一些其他用途”但是沒人規定次通道的空間只放音樂光碟曲名等資料吧!

  7. #7
    會員
    註冊日期
    2001-03-28
    討論區文章
    1,641
    要燒一些特殊保護的光碟時才用得到,如果原光碟有用到次通道資料軌保護方式的話。

  8. #8
    會員
    註冊日期
    2001-04-02
    討論區文章
    95
    謝謝各位熱心的解說,我懂了

類似的主題

  1. [求助]A disk read error occurred??
    作者:Picasso 所在討論版:-- 電 腦 硬 體 討 論 版
    回覆: 7
    最後發表: 2009-07-14, 09:19 PM
  2. Articles about Disk, Partition, and Related Tools
    作者:Schnaufer 所在討論版:---- Windows 作 業 系 統 精 華 版
    回覆: 1
    最後發表: 2003-06-13, 02:07 PM
  3. 【求助】Hard Disk Help
    作者:editor 所在討論版:-- 電 腦 硬 體 討 論 版
    回覆: 2
    最後發表: 2002-05-07, 06:30 PM
  4. 請問 ghost 的 disk to disk 方式
    作者:show 所在討論版:-- 電 腦 硬 體 討 論 版
    回覆: 2
    最後發表: 2002-02-16, 04:30 AM
  5. Help : IBM Disk Manager
    作者:Nigel 所在討論版:-- 電 腦 硬 體 討 論 版
    回覆: 2
    最後發表: 2002-01-07, 09:19 PM

 

此網頁沒有從搜尋引擎而來的訪客

發表文章規則

  • 不可以發表新主題
  • 不可以回覆文章
  • 不可以上傳附加檔案
  • 不可以編輯自己的文章
  •