| 會員  | 引用:
謝謝 xbug 兄.. 我也會去試試的... 還有... cengzie 兄.. 和Bus有關?是PCI吧... 我想你指的是Scsi卡的開機吧...由Bus的順序可以決定.. 我想該裝置的IRQ優先權應該也是較高的那一個.. | |
| 回覆 |
| ．戶樞不蠹．流水 | W2k對IRQ管理能裡不錯..本身就可以讓多裝置共用IRQ而且可以正常無誤工作.. 至於PCI插槽會影響的是除了IRQ還有檢查順序..譬如說會搜尋PCI上有沒有BIOS..不過BIOS也有能力指派不同PCI上裝置的IRQ |
| 回覆 |
| VECTRA-B 進口版 | 引用:
vgaㄉ優先也是 以前玩3vga時就知道ㄌ~~` | |
| 回覆 |
| 會員 | 引用:
那PS/2用12不是太浪費了.... | |
| 回覆 |
| VECTRA-B 進口版 | 引用:
| |
| 回覆 |
| 進階會員 | 引用:
Each PCI system board consists of one or more slots and a PCI Interrupt Router. Each slot has four interrupt pins, known as INTA#, INTB#, INTC#, and INTD#. The PCI Interrupt Router has several interrupt pins, known as PIRQ1#, PIRQ2#, PIRQ3#, ... PIRQn#. There is no PIRQ0#. The INTn# pins for each slot may be wire OR'd with other INTn# pins from the same or other slots, and these groups of pins may also be connected to a PIRQn# pin on the Interrupt Router. The actual PIRQ value assigned to each interrupt pin on each Interrupt Router is assigned by the chip-set vendor. Microsoft will work closely with chip-set vendors to assign appropriate PIRQ values for existing and future PCI chip sets. | |
| 回覆 |
| VECTRA-B 進口版 | 跟INTA#, INTB#, INTC#, INTD# 有關ㄚ~~~~~ |
| 回覆 |
| XML | RSS 2.0 | RSS |
本論壇所有文章僅代表留言者個人意見，並不代表本站之立場，討論區以「即時留言」方式運作，故無法完全監察所有即時留言，若您發現文章可能有異議，請 email :[email protected] 處理。
