【求助】Tyan S2466 龜速問題

[kukus]

小弟昨日剛買Tyan S2466
系統為2000mp x2
Kingstone Ram DDR 512 x4
IBM 40G System
Scsi UW160
Win2000 ps2

安裝前後發現速度其慢無比
(另一台 k6 500都比他快)
甚至滑鼠動作都有延遲的問題
執行許多程式 都要等一段時間才出現
測試硬碟傳檔 100m居然出現 364分鐘 才一分鐘就當了
請教各位大大 是否有人碰到類似問題 或可以指點一下
感激不盡

[kukus]

喔!!
忘了寫
Power 是 至寶520w
感謝各位

[r2d2]

2466插一般ddr只支援到2條
插滿4條必須都是ecc的
用一般的插到4條原廠不保證可以正常運作
試試看只插兩條

[kukus]

感謝回應

以下是從國外的網站找到的資料
希望有這塊板子的User能解決同樣的問題

- Updated motherboard BIOS to the latest rev.
- Installed Adaptec SCSI card in the 3rd PCI slot

NOTE: If your buying a Adaptec Ultra 160 card save your money and get the 29160N which is not a 64 bit card since you cant use it this way. If you already own one, just put it in the 32 bit slot like I did.

IF your system is running in ACPI mode it appears to help stability if you shut this off in the bios and change this setting under windows. To do this:

- In Windows 2000 under device manager-> computer change the ACPI Multiprocessor PC to MPS Multiprocessor PC then reboot and go into the bios.
- Disable ACPI in the bios and restart, windows will redetect a lot of components and you might have to reinstall some drivers.

The system seems to work great now without any issues. Hope this helps some people.

其實 也搞不懂為何如此處理
反正Scsi與CPU的效率明顯提昇(SCSI數值高約8~10倍)
不知是否有高手能解釋，老外如此處理的用意為何???
感謝

[ching]

我也是用這一塊，不過沒有上面這位人兄的問題，因我的記憶體是從國外買的有ECC，適合2466使用！建議使用WIN2000SP3！但我不知你SCSI是不是64 BIT的介面，有64 BIT的話比較能發揮這塊板子！