【求助】Windows 98 開機出現 Spool32錯誤

[lewind]

各位好，來向各位求救...
有誰知道該如何解決呢？....

OS:Windows 98

狀況：
稍早安裝 hp LaserJet 2200 for 98 的Driver 連接埠-LPT1. 一切正常.
但重開機後，隨即出現 Spool32.exe cause a fault on KERNEL32.DLL...

之後：
開始-設定-印表機 -> 照樣出現上述訊息。

不死心：
開始-設定-印表機->沒品應(大約三十秒)->終於出現印表機資料夾。
->試著重新安裝印表機(任何一種)->『沒有可用的連接埠』。

已試過：
1.重新 COPY 一份新的 Spool32.exe 到C:\Windows\System底下.->沒用.
2.重新「覆蓋性」安裝Windows98.(未format,僅開始-執行-setup).->沒用.
3.安全模式開機->錯誤訊息一模一樣.
4.msconfig->選擇性開機->拿掉所有選項->還是沒用.
5.scanreg->試著救回安裝LaserJet2200前的Registry檔->沒有備份到之前的->還是沒用...

求救~~~~~~
救命啊……[/B] [/B]

[ericlien]

http://support.microsoft.com/default.aspx?kbid=191949

[lewind]

最初由 ericlien 發表
http://support.microsoft.com/default.aspx?kbid=191949

感謝您的指教。
但是，文中所提的--
Windows 98
Click Start, point to Programs, point to Accessories, point to System Tools, and then click System Information.
On the Tools menu, click System Configuration Utility.
Click Selective Startup on the General tab, and then click to clear the following check boxes:
Process Config.sys File
Process Autoexec.bat File
Process Winstart.bat File
Process System.ini File
Process Win.ini File
Load Startup Group Items

Note You must reinstall the printer driver when you disable the Win.ini file because the printer and port information is stored in this file.
Click OK, and then quit the System Information tool.
Restart your computer.
For information about how to clean-boot a Windows 98-based computer by using the System Configuration tool, view the "Narrowing the Focus" section in the following Microsoft Knowledge Base article:

我都已經做過了 ……還是沒用....
Anyway,,,還是謝謝。